can drunken fish grass be cut

Drunken fish grass can be propagated by cutting. The cutting method is as follows:

The cutting of drunken fish grass is generally carried out in May and June every year. At this time, the cutting survival rate is high and the propagation is rapid. Before cutting, a shading shed shall be set up to disinfect the river sand in the cutting bed. The semi lignified branches with good growth shall be selected, and a 10 cm long section shall be cut off. All the lower leaves shall be cut off, two-thirds of the upper leaves shall be cut off, the upper part shall be cut into a flat mouth and the lower part into a oblique mouth. Divide the river sand into a ditch with a depth of about 5cm, place the cuttings neatly, cover them with sand, and spray some water after compaction. The cutting leaves are not in contact with each other and are evenly distributed. After all cutting, spray water again, spray thoroughly, and then cover with plastic film to seal the surroundings

cuttage curing of drunken fish grass

Drunken fish grass likes to grow in warm and humid environment and fertile and deep soil. It has strong vitality and adaptability, but it is not resistant to water and humidity. It generally grows in roadsides or riverside shrubs in mountainous areas with an altitude of 200-2700 meters. According to such growth habits, to develop beautiful drunken fish grass, it needs reasonable maintenance after cutting

The maintenance after cutting is mainly to cool down and moisturize. You can spray water twice a day to keep the temperature in the shed at about 28 ℃. About 20 days in May and June, and about 2 weeks in July and August. After rooting, pay attention to ventilation and control water. The seedlings can be transplanted in a week

Drunken fish grass can be cut, but it should be cut in the right way