1、 Cutting time

Cutting is a widely used method of propagation. If it is in the greenhouse in the north, it can be carried out all year round. If it is an ordinary family, it is usually in July and August

2、 Cutting material

The selection of materials is very important and requires a lot. Use mature and full branches as cuttings. It is most suitable for each branch to have two or three nodes, and the incision at the lower part should be one centimeter away from the node, and the incision at the upper end should be two centimeters above the terminal bud, so it is the easiest to survive

3、 Treatment of materials

After selecting the insert, trim it first. Cut off most of the leaves and the tendrils on them. After cutting, the lower end of the cuttings should be treated with indole butyric acid, so that it is easy to take root

4、 Matrix preparation

In order to meet the requirements of looseness, permeability and fertility, the two kinds of soil can be mixed. It can be made by mixing burned soil and garden soil in a ratio of three to seven or two to eight

5、 Cutting

After the material and matrix are ready, you can cut. Control the insertion depth of the insert to about two-thirds of the whole length, not too deep or too shallow

6、 Later maintenance

After the plug is inserted, it should be watered once. After that, we should also ensure that it is wet, and replenish water by spraying water every day. If you cut in early spring, you should also prevent cold. About a month or so, it can become a seedling